Die Casting Machine DC-420
Applicable for V3C / V4N series
- Clamping force 420 tons
- Tie-bar spacing 650*650mm
- Max. injecting weight 4.18kg, Die height 300-700mm
Die Platen
| ITEM | UNIT | VALUE | |||
|---|---|---|---|---|---|
| Basic | Control Unit | PLC+MMI | |||
| Shot Unit | 3 Phases | ||||
| Injection sys. | 3 Stages | ||||
| CLAMPING MECHANISM | Clamping force | Ton | 420 | ||
| Die Platen | mm | 1000x1000 | |||
| Tie-bar Spacing | mm | 650x650 | |||
| Die Stroke | mm | 470 | |||
| Die Height | mm | 300~700 | |||
| Clamping Indicator | Optional | ||||
| INJECTION MECHANISM | Injection Force | Ton | 35 | ||
| Intensifier Rate | 2.3 | ||||
| Injection Storke | mm | 500 | |||
| Plunger Tie Penetration | mm | 185 | |||
| Shot Position | -150 | ||||
| Injection Pressure | kg/cm² | 110~140 | |||
| Max.Injection V (Up) | m/s | 7 | |||
| Available Plunger Diameter | mm | Ø60, Ø70, Ø80 | |||
| EJECTING MECHANISM | Ejecting Force | Ton | 20 | ||
| Ejecting Stroke | mm | 90 | |||
| CORE SYSTEM | Core NO.1 Outlet | pt | 3/4"x2 | ||
| Core NO.2 Outlet | pt | 3/4"x2 (optional) | |||
| Core NO.3 Outlet | pt | no | |||
| CASTING CAPACITY | Plunger Diameter | mm | Ø60 | Ø70 | Ø80 |
| Injection Pressure | kg/cm² | 600/1200 | 441/882 | 337/674 | |
| Casting Area | cm² | 584/292 | 794/397 | 1036/518 | |
| Injecting Volume | cm³ | 904 | 1230 | 1607 | |
| Injecting Weight | kgs | 2.35 | 3.2 | 4.18 | |
| COOLER | Water Inlet | RcPT | 2" | ||
| Water Outlet | RcPT | 2" | |||
| Hydraulic Cooler In | RcPT | 1" | |||
| Hydraulic Cooler Out | RcPT | 1" | |||
| Die Water Valve (fix) | 3/8"x7 | ||||
| Die Water Valve (mov) | 3/8"x7 | ||||
| Hydraulic Cooler Flow | L/min | 40 | |||
| Die Cooler Flow | L/min | 30~70 | |||
| MOTOR | Motor | kw | 22.5 | ||
| Power Source | V | AC220/380 | |||
| MACHINE DIMENSIONS | Size (LxWxH) | mm | 6500x2200x2500 | ||
| Weight | Ton | 16 | |||
| Hydraulic Oil | L | 800 | |||